Predator fencing_Cliffe Pools

Description

• Supply and install 5,000m anti-predator fencing and 5 gates. The following design principles are overarching: o The overall fence height (including overhang) must be no more than 2m high but no less than 1.8m high. o The apron must be:  No less than 300mm when buried vertically in the ground. o The netting mesh must comprise 50mm vertical spacing and 100mm horizontal spacing between wires i.e. 'otter' or 'predator' netting. o The hinge on the netting to be placed at the top of the fence to create the overhang with crank brackets. o Crank extension brackets must be no less than 400mm at 45 degrees. o Gates are vehicle gates and must have/be:  Fully meshed.  Fitted with an overhang that finishes flush with the adjacent fence overhang.  A concrete threshold no less than 400mm x 400mm x the width between gate posts and finished flush with ground level.  Gap between the bottom of the gate and the threshold must be no more than 50mm. • Whilst the specification is presented below, considering material supply issues, variation to the specification is acceptable. However, variation from the overarching design principles above is not acceptable. • All works must be completed, and invoices received by the 1st of February 2023.