Rolling stock

Description

Network Rail are undertaking several infrastructure projects on the East Coast Main Line to increase the number of available train paths between London and Edinburgh. As a result of this, London North Eastern Railway (LNER) will be able to operate 6.5 trains per hour in each direction between London and Doncaster. The infrastructure that enables the timetable to be implemented is expected to be completed prior to the May 2022 timetable change. Initially, LNER will retain a fleet of IC225 trains to provide the seating capacity required by the new timetable. However, this will be an interim measure until an additional fleet is procured which will replace the IC225 fleet. LNER is seeking to procure a minimum fleet of ten (10) InterCity trains based around specific technical and operating characteristics. The trains shall be fully rated for operation on 25 kV Overhead Line Equipment (OLE) and with significant self-power capability for operation away from the OLE. On Board Energy Storage (OBES) for traction will be specified as a mandatory requirement to reduce, and wherever practicable eliminate, diesel usage where it would otherwise be necessary. LNER anticipates that some degree of diesel traction may be required to supplement the OBES to meet all the self-power requirements. A basic outline specification for the fleet is available at: https://supplierlive.proactisp2p.com/Account/Login Please note that the information contained in the specification is of a general nature only and does not purport to be comprehensive. The information may be subject to change in advance of the Invitation to Negotiate (ITN). LNER has chosen to run the procurement under the negotiated procedure with a prior call for competition under regulation 47 of the UCR. LNER is registered with the Railway Industry Supplier Qualification Scheme (RISQS), enabling it to use this as a qualification system. To participate in this procurement, suppliers must be fully registered and qualified on RISQS under both of the following RICCL codes and activities by 25 November 2020 at 16.00. 1) RICCL code: E.E.2, product/service: electrical multiple units, activity: manufacture (MNF); and 2) RICCL code: E.E.2, product/service: electrical multiple units, activity: maintain (MAN). Registration on RISQS must be done through the RISQS system, this can be done online at: https://shop.risqs.org/Register However, this procurement and all communication with suppliers will be managed electronically via LNER's Proactis system, not the RISQS system. To participate in this procurement, suppliers will therefore need to register on the RISQS system and the Proactis system. Suppliers must register their interest in this procurement on the Proactis system by 25 November 2020 at 16.00. If suppliers are not yet registered on Proactis, this can be done online at: https://supplierlive.proactisp2p.com/Account/Login Suppliers must allow sufficient time to register an interest in this procurement. Once registered on the Proactis system, suppliers can register interest for a specific procurement. This is done by looking at the opportunities section. The registered supplier will receive an on-screen notification to alert them once this has been completed. As a user of the Proactis system, the supplier will have access to the Proactis messaging function which facilitates all messages sent to the supplier, and from the supplier, in relation to this procurement. It is the supplier's responsibility to access these messages on a regular basis to ensure they have sight of all relevant information applicable to this procurement. For technical assistance relating to use of the Proactis system, please contact the supplier support helpdesk on: http://proactis.kayako.com/default Suppliers will be presented with a series of screenshots showing the different supplier portals supported and should pick the one that looks like the system they are having difficulty with — this is the supplier network. Suppliers should note that they do not need to log in, click Submit a Ticket, and on the next screen, click Next, it will then direct the supplier to the ticket logging screen. Suppliers should complete all the boxes with as much information as possible and include a contact telephone number for the helpdesk. Alternatively, suppliers can email suppliersupport@proactis.com to automatically log a ticket for the https://supplierlive.proactisp2p.com/Account/Login system For any critical and time sensitive issues, supplier support can be reached on +44330 0050352, however it is recommended that a ticket is logged using the above method(s) prior to calling so that the team has ample time to review the issue. Only suppliers who are fully registered and qualified on both the stated RICCL codes and activities and have registered an interest in this procurement through the Proactis system by 25 November 2020 at 16.00 will be able to take part in this competition. If an interested supplier is not fully registered and qualified against both the stated codes and activities by 25 November 2020 at 16.00, they will not be capable of being shortlisted.