Water Recycling (re-use) Plant: Design and Construction

Description

Southern Water is carrying out a Market Engagement exercise on the supply of Water Recycling (re-use) Services and invites potential suppliers to contribute to the market research. Southern Water's aim is to better understand market capabilities. This is not a call for competition. Lot 1: Introduction Southern Waters Water Resource Management Plan 2019 (WRMP19) proposes the provision of Water Recycling to support existing water resources in drought events up to a 1 in 200 year return period. From this plan there is a requirement for the Design, Construction and potential operation of four Water Recycling Plants (WRPs). Southern Waters long term strategy, includes further utilisation of the water recycling process, AMP8 and beyond. Two of the projects set to pioneer the application of water recycling within the UK are to be constructed close to Maidstone and one close to Littlehampton. The plants are required to be constructed and commissioned by 31 March 2027. Permitting of the discharge consent for the recycled or waste stream water has not yet been commenced. Project overview Littlehampton WRP The plant will treat flows from an existing coastal wastewater treatment works. The WRP will be required to produce up to 25Ml/d of recycled water suitable for discharge to an inland water course. Waste products will be treated and discharged to an existing long sea outfall. The design and build of the transfer pumping station and main is the subject of other contracts. Maidstone WRP The plant will treat flows from an existing wastewater treatment works. The WRP will be required to produce up to 21.5Ml/d of recycled water suitable for discharge to an inland water course. Waste products will be treated and either discharged via an existing outfall or transferred to a nearby WTW for dilution and treatment. The design and build of the transfer pumping stations and mains is the subject of other contracts. Services required: . The design and construction of the Biological Treatment process, this is expected to be MBR or equivalent to enhance the existing treatment. This shall include additional sanitary and nutrient removal treatment prior to the Advanced Water Treatment. . The design, construction and potential operation of Advanced Water Treatment ((AWT) e.g., Reverse Osmosis, UVAOP, Remineralisation). Design of the Advanced Water Treatment shall enable the discharge of the treated water into an inland water course. . Definition of the design envelope of the flows and loads to be transferred by the pumping station and transfer pipelines contracts. . Design services for the provision of information and in partnership with SW negotiate and secure all permissions, permits and consents that may be required for the WRP, including any amendments until the plant has achieved client acceptance. . It is expected that the contractor will provide operational services over a defined period that will correspond to the first replacement of major plant items including M&EICA components and this is applicable to the AWT supplier as well. Training of operational staff will be expected and this training package will include hands-on training as well as any necessary certification to operate the AWT component competently. Delivery Strategy The proposed delivery route for the entire programme identifies three separate packages of work: . Biological Treatment process: design and construction . Advanced Water Treatment; design, construction and operation . Pipeline: design and construction The pipeline is subject to existing Framework suppliers and provided for context to the wider programme of works. The Biological Treatment process is to be designed prior to the confirmation of the Advance Water Treatment design envelope. Therefore, the programme is to be tendered by scope, opposed to location, progressing with the packages of work at the earliest opportunity. The initial package of works will be for the design and construction of the Biological Treatment process. Design services will also be sought as part of the same package of works to support the development for the process parameters for the AWT, in addition to support in obtaining the necessary permits to construct and operate the AWT. Additional information: Additional information and questions SWS would welcome answers for can be obtained from our e-sourcing portal: https://southernwater.bravosolution.co.uk/ Southern Water will hold a virtual presentation commencing 9am on the 18th May. To attend the virtual presentation, please register your interest on our e-sourcing portal by 15 May 2023 to receive the invite to join via MS Teams.