NP67524 Neurosurgery

Description

This framework will cover Neurosurgery consumables and specifically related products. The current lot structure is as follows and is subject to change. - Lot 1 - Neurosurgical Drill Nose cones & Burrs - Lot 2 - Dural Sealant and applicator - Lot 3 - Dural Substitute - Lot 4 - CSF Drainage Catheters inc. Drainage Collection Bags - Lot 5 - Shunt Valves - Lot 6 - Cranial Burrhole Plates and Screws - Lot 7 - Skull Pins - Lot 8 - Aneurysm Clips & Clip Applicators - Lot 9 – Raney Clips & Clip Applicators Lot 1: Neurosurgical Drill Nose cones & Burrs A drill nose cone should fit onto a generic high speed surgical drill. Different cutting burrs can be attached to the drill via the nose cone. The cutting burrs must be single use and single pack. Lot 2: Dural Sealant and applicator A Dural sealant is designed to facilitate watertight closure of an intact Dura. This can be used alongside other methods of Dural repair such as sutures. Dural Sealant is used in high leak-risk areas. A Dural sealant needs to be strongly adherent and resist physiological pressure. Lot 3: Dural Substitute Dural substitute is a synthetic or animal derived replacement for the Dura and is used when Dural tissue is missing or inadequate. This Dural substitute id designed to facilitate a watertight closure. A Dural substitute needs to be able to bridge gaps and regenerate Dural tissue. Lot 4: CSF Drainage Catheters inc. Drainage Collection Bags A catheter used for CSF management and disorders of CSF flow, including the collection bag. This product needs to be antibiotic impregnated. Lot 5: Shunt Valves Shunt valves allow a fixed amount of CSF drainage. A programmable shunt valve provides the option of changing the opening pressure of the valve. An important tool in hydrocephalus, especially in complex cases such as paediatric cases. Lot 6: Cranial Burrhole Plates and Screws A screw and plate fixation system for bone (cranial or spinal). The screws need to be low profile so that they are not visible through the skin. Lot 7: Skull Pins Skull pins are used for cranial stabilisation, inserted in the skull clamp to fixate the patient's head during surgery. The skull pins need to fit the Mayfield (this is the skull clamp). Lot 8: Aneurysm Clips & Clip Applicators An aneurysm clip is a small metallic clip that fits alongside the neck of an aneurysm to prevent blood from entering. The clip stays permanently clamped on the aneurysm. Each clip is applied with a compatible applicator that preserves the closing force of the clip. The clips should be MRI compatible. Lot 9: Raney Clips & Clip Applicators Raney Clips are used to prevent wound bleeding after incision for craniotomy. They must be east to apply, whilst still maintaining haemostasis. (single Use).