Boundary Boxes (and accessories) for Water Meters

Description

The supply of boundary boxes, lids and accessories for water meters (including smart meters), replacements undertaken during mains and communication pipe renewal programmes and for the replacement of existing defective apparatus. Lot 1: Portsmouth Water is planning to purchase boundary boxes for operational purposes and its smart water meter deployment programme over the next 10 years. These will primarily be installed at new or previously unmetered properties. In addition to this we will be undertaking maintenance and replacement of existing boundary box installations. The Boundary boxes will be required to provide the following specifications: •Boundary boxes must be Reg31 compliant (Regulation 31 of The Water Supply (Water Quality) Regulations 2016 (as amended) •Boundary boxes will ideally be a sealed unit adjustable and telescopic to adjust to different depths of meter installations, though other solutions will be considered. •The box will also ideally cater for shallow installations as well as installation in contaminated ground. Boundary Box Unit The Boundary box: Will ideally provide 25mm push-fit fittings within the boundary box. Boundary Box Lid: We wish to assess different lid constructs due to our deployment of smart metering and communication requirements. This will be a key consideration to Portsmouth Water in the selection of lid materials. Additional information: Portsmouth Water intends to award this contract for the initial 5 years with a potential extension to another 5 years.